SC200-DWS11

The quality of drinking water can change with time and become contaminated with harmful bacteria. The Sterilight Cobalt™ Integrated Home System is a reliable, economical and chemical-free way to safeguard drinking water in any residential application. The Sterilight Cobalt™ has been designed and tested to ensure quality drinking water is at everyone’s finger tips.

Features of the Sterilight Cobalt UV purification system
  • Equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli and viruses not visible to the naked eye.
  • The system is easy to maintain and service with easy lamp and cartridge replacement and quick disconnect fittings.
  • The ultraviolet lamp allows for easy removal of the lamp without any special tools.
  • Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation.
  • Comes equipped with a 5-micron sediment pre-filter to reduce particles in the water.
  • Also comes equipped with a 5-micron carbon filter to reduce taste and odour of chlorine.
  • High flow polypropylene filter housings with 1“ full flow connections, available in either 10“or 20“ versions.
  • Solid steel mounting bracket, compact design and easy to install.

Specifications

View Specs
Manuals
Brochures

Accessories

Temperature Management Valve - 440179

Integral temperature management valve for use on systems incorporating Sterilume high-output UV lamps. This fully automatic valve is installed on the outlet port of the disinfection system and will discharge a small amount of water to drain when the system reaches a preset temperature. T ...

Replacement Parts

Sediment Filter CMB-510-HF

CMB-510-HF - Sediment filter 20-5 micron for dirt/rust, 4 3/8 OD x 10" long.

Carbon Block Filter C2-01

Sterilume HO UV Lamps - S200RLH0

 high-output UV replacement lamp [30 cm (11.8")]

Quartz Sleeve - QS-200

33.2 cm (13.1"), domed

O-Ring - 410867

Retaining Nut - RN- 001

Retaining nut

Power Supply

CobaltÔäó controller for all "BASIC" high-output models, water-tight case, 4 segment LED display showing lamp life remaining and total operating time, audible indicator, one controller operates 100-240V./50-60Hz. (c/w lamp connector) (detachable IEC power cord sold separately)

Lamp / Sleeve Combo Kits (2-pieces) - SHO200-QL

Kit, Lamp and Sleeve (comes with 1 o-ring)

Product Flow Rates

Dosage
UV
Rate
30 mJ/cm² 95% UVT @ eoll 8 gpm
40 mJ/cm² 95% UVT @ eoll 6 gpm

Product Specificiations

Dimensions
Width 23.5 inches
Height 22 inches
Diameter 8 inches
Inlet/Outlet Port Size 1" FNPT / Combo 3/4" FNPT & 1" MNPT
Shipping Weight 15.4 kg
Reactor Chamber Material 304 S.S.
Electrical
Max. current 0.4 Amp
Lamp Type Sterilume HO
(high-output)
Power Consumption 35 W
Lamp Power 25 W
Voltage 100-240V / 50-60Hz
Operating Parameters
Maximum hardness 120 ppm
(7 grains per gallon)
Maximum iron 0.3 ppm
Ambient Temperature 0-40 °C
(32-104 °F)
Maximum Operating Pressure 125 PSI
(8.62 bar)
Minimum UVT 75 %
Installation Orientation Vertical
Features
UV Intensity Monitor No
Visual "Power On" Yes
Audible Lamp Failure Yes
Audible alarm mute button Yes
Visual Lamp Life Remaining Yes
Lamp Replacement Indicator Yes
Safety Interlock Yes
Flow Restrictor Optional
CoolTouch fan Optional
Flow Pacing No
Solenoid Valve No
4-20 Interface No
Dry Contact No
Certifications
CSA Yes
CE Yes
Filters
Sediment Filtration Yes, 5 micron
Filter Housing Two 10" high flow
Carbon Filtration Yes, 5 micron