Sterilight SCM-600

The quality of drinking water can change with time and become contaminated with harmful bacteria. The Sterilight Cobalt™ system is a reliable, economical and chemical-free way to safeguard drinking water in any residential application. The Sterilight Cobalt™ system has been designed and tested to ensure quality drinking water is at everyone’s finger tips.

Features of the Sterilight Cobalt UV purification system
  • Equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli and viruses not visible to the naked eye.
  • Specially designed and tested Sterilume™-HO lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous purification.
  • The system is easy to maintain and service.
  • Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation.
  • The Cobalt™ ICE power supply visually displays the remaining lamp life and will go into alarm if the lamp fails to notify the homeowner. Monitored systems also have the ability to read the percentage of UV output.
  • The power supply has a sealed case to prevent damage from accidental water intrusion and is fully CSA and CE compliant.
  • Monitored systems have a specialized 254nm UV intensity sensor which notifies homeowner of changes in UV performance.
  • Monitored systems have an optional solenoid valve which will stop the flow of water through the chamber if the UV performance falls below a safe level.

Specifications

View Specs
Manuals
Brochures

Accessories

Y Cable Adapter 260134

"Y" cable adapter for 4-20mA option on monitored systems. Comes with 65' of cabling for the 4-20mA output and a male connector to couple with the existing 254NM-S1, 254NM-S2 or 254NM-C1 UV sensor (not included)

Solenoid Cable - 260135

Solenoid cable for all monitored systems, female IEC connection with 10' of cable and “bare” leads, solenoid valve sold separately.

Temperature Management Valve - 440179

Integral temperature management valve for use on systems incorporating Sterilume high-output UV lamps. This fully automatic valve is installed on the outlet port of the disinfection system and will discharge a small amount of water to drain when the system reaches a preset temperature. T ...

Low lead Solenoid Valve SOL-1.0

1" solenoid valve, 110V./50-60Hz.

Low Lead Solenoid Valve -1.0/2

1" solenoid valve, low lead body, 220V./50Hz.-240V./60Hz.

Replacement Parts

Currently Unavailable

There are no accessories available for this product at the current time.

Product Flow Rates

Dosage
UV
Rate
40 mJ/cm² 95% UVT @ eoll 90.8 gpm
40 mJ/cm² 95% UVT @ eoll 90.8 gpm
40 mJ/cm² 95% UVT @ eoll 90.8 gpm

Product Specificiations

Dimensions
Length 30.7 inches
Diameter 3.5 inches
Power Supply 24.1 x 8.1 x 6.4 cm
(9.4" x 3.2" x 2.5")
Inlet/Outlet Port Size 1" MNPT
Shipping Weight 9.1 kg
Reactor Chamber Material 304 S.S.
Electrical
Lamp Type Sterilume HO
(high-output)
Max. current 0.7 Amp
Power Consumption 70 W
Lamp Power 58 W
Voltage 100-240V / 50-60Hz
Operating Parameters
Maximum hardness 120 ppm
(7 grains per gallon)
Maximum iron 0.3 ppm
Ambient Temperature 0-40 °C
(32-104 °F)
Minimum Operating Pressure 4 PSI
(27.5 kPa)
Minimum UVT 75 %
Installation Orientation Horizontal or Vertical
Features
UV Intensity Monitor Yes
Visual "Power On" Yes
Audible Lamp Failure Yes
Audible alarm mute button Yes
Visual Lamp Life Remaining Yes
Lamp Replacement Indicator Yes
Safety Interlock Yes
Flow Restrictor Optional
Solenoid operation indicator No
Flow Pacing No
Solenoid Valve Optional
4-20 Interface Optional
Dry Contact No
Certifications
CSA Yes
CE Yes