The quality of drinking water can change with time and become contaminated with harmful bacteria. The Sterilight Platinum is a reliable, economical and chemical-free way to safeguard drinking water in any light commercial application. The Sterilight Platinum has been designed and tested to ensure quality drinking water is at everyone’s finger tips.

Features of the Sterilight Platinum UV purification system 
  • Equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli and viruses not visible to the naked eye.
  • Specially designed and tested Sterilume™-HO lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous purification.
  • The Flow-Pace™ UV Sensor promises system stability and long-life reliability with low power consumption, reducing operating costs and heat transfer into the water.
  • Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation.
  • The Sterilight Platinum power supply visually counts down remaining days until lamp replacement, provides total running time of controller, visually represents UV intensity output in % and conducts a full system diagnostic check on start-up.
  • Axial Flow reactors include a patented axial flow system installed at the inlet – ensuring water confidence each and every time.


View Specs


Junction Box

All-in-one solenoid junction box for Platinum systems. Water-tight box allows for easy connection to power, solenoid valve (supplied separately) and the dry contact connection on the Platinum controller, supplied with 110V./60Hz. North American (NEMA 5-15P) power cord.

Temperature Management Valve

Integral temperature management valve for use on systems incorporating SterilumeÔäó-HO, high-output UV lamps such as the CobaltÔäó or PlatinumÔäó systems. This fully automatic valve is installed on the outlet port of the disinfection system and will discharge a small amount of w ...

Solenoid Valve

1" solenoid valve, all brass body, 110V./50-60Hz.

Replacement Parts

Lamp / Sleeve Combo Kits (2-pieces)

Kit, Lamp and Sleeve SPV-6 ,SP320-HO, SC/SCM-320 (comes with 1 o-ring)

Quartz Sleeve

SPV-6, SP320-HO, SC-320 & SCM-320 series [45.2 cm (17.8"), domed]

Power Supply

PlatinumÔäó ICE controller for all "SPV" and "SP" systems, one controller operates 100-250V./50-60Hz. (c/w lamp connector) (detachable power cord sold separately)

Electrical Cords

120V, 16AWG replacement cord for SP and SPV series (North American plug)

Sterilume HO UV Lamps

SPV-6, SP320-HO, SC-320 and SCM-320 high-output UV replacement lamp [42 cm (16.5")]

UV Sensor

Flow-Pace Ôäó UV sensor assembly (complete with 3' sensor cable) for SP NON-VALIDATED PLATINUMÔäó systems and "HW" hot water PlatinumÔäó

Product Flow Rates

16 mJ/cm² 95% UVT @ eoll 106.0 gpm
30 mJ/cm² 95% UVT @ eoll 56.8 gpm
40 mJ/cm² 95% UVT @ eoll 41.6 gpm

Product Specificiations

Length 23 inches
Diameter 3.5 inches
Power Supply 25.4 x 11.4 x 5.3 cm
(11" x 4.5" x 2")
Inlet/Outlet Port Size Combo 3/4" FNPT, 1" MNPT
Shipping Weight 6.8 kg
Reactor Chamber Material 304 S.S.
Lamp Type Sterilume™-HO
Lamp Type Sterilume HO
Max. current 1.5 Amp
Power Consumption 48 W
Lamp Power 37 W
Voltage 100-250V / 50-60Hz
Operating Parameters
Maximum hardness 120 ppm
(7 grains per gallon)
Maximum iron 0.3 ppm
Maximum humidity 95%
Ambient Temperature 2-40 °C
(36-104 °F)
Maximum Operating Pressure 125 PSI
(8.62 bar)
Minimum Operating Pressure 4 PSI
(27.5 kPa)
Minimum UVT 75 %
Installation Orientation Vertical
UV Intensity Monitor Yes
Visual "Power On" Yes
Audible Lamp Failure Yes
Audible alarm mute button Yes
Visual Lamp Life Remaining Yes
Lamp Replacement Indicator Yes
Diagnostic Check Yes
Safety Interlock Yes
Flow Restrictor Yes
COMMcenter control package No
CoolTouch fan No
Colour-coded plug and play connections No
Safety cap & special lamp plug Yes
Reference card No
Solenoid operation indicator No
Flow Pacing Yes
Solenoid Valve Optional
4-20 Interface No
Dry Contact Yes
CE Yes