The quality of drinking water can change with time and become contaminated with harmful bacteria. The Sterilight Silver™ system is a reliable, economical and chemical-free way to safeguard drinking water in any residential application. The Sterilight Silver™ system has been designed and tested to ensure quality drinking water is at everyone’s finger tips.

Features of the Sterilight Silver UV purification system
  • Equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli and viruses not visible to the naked eye.
  • Specially designed and tested Sterilume™-EX lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous purification.
  • The system is easy to maintain and service.
  • Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation.
  • The Silver™ ICE power supply visually displays the remaining lamp life and will go into alarm if the lamp fails to notify the homeowner. Monitored systems also have the ability to read the percentage of UV output.
  • The power supply has a sealed case to prevent damage from accidental water intrusion and is fully CSA and CE compliant.
  • Monitored systems have a specialized 254nm UV intensity sensor which notifies homeowner of changes in UV performance.
  • Monitored systems have an optional solenoid valve which will stop the flow of water through the chamber should any changes in the UV performance falls below a safe level.


Y Cable Adapter 260134

"Y" cable adapter for 4-20mA option on monitored systems. Comes with 65' of cabling for the 4-20mA output and a male connector to couple with the existing 254NM-S1, 254NM-S2 or 254NM-C1 UV sensor (not included)

Solenoid Cable - 260135

Solenoid cable for all monitored systems, female IEC connection with 10' of cable and “bare” leads, solenoid valve sold separately.

Low lead Solenoid Valve - SOL-0.75

3/4" solenoid valve, 110V./50-60Hz.

Replacement Parts

Sterilume EX UV Lamps - S810RL

61 cm (31.9")

Lamp / Sleeve Combo Kits (2-pieces) - S810-QL

Kit, Lamp and Sleeve

Quartz Sleeve - QS-810

2 x 2.3 x 84.5 cm (0.8" x 0.9" x 33.3"), open

Retaining Nut - RN- 001

Retaining nut

O-Ring - 410867

UV Sensor 254NM-S1

UV sensor assembly for SILVER monitored series,3' sensor cable with water-tight connection.

Electrical Cords 260010

North American (NEMA 5-15P), 3-prong grounded (115V.)

Power Supply - BA - ICE- S

detachable IEC power cord sold separately

Product Flow Rates

16 mJ/cm² 95% UVT @ eoll 20 gpm
30 mJ/cm² 95% UVT @ eoll 10 gpm
40 mJ/cm² 95% UVT @ eoll 8 gpm

Product Specificiations

Length 35.6 inches
Diameter 2.5 inches
Power Supply 19 x 8.1 x 6.4 cm
(7.3" x 3.2" x 2.5")
Inlet/Outlet Port Size 3/4" MNPT
Shipping Weight 5.0 kg
Reactor Chamber Material 304 S.S.
Max. current 0.4 Amp
Lamp Type Sterilume EX
Power Consumption 46 W
Lamp Power 37 W
Voltage 100-240V / 50-60Hz
Operating Parameters
Maximum hardness 120 ppm
(7 grains per gallon)
Maximum iron 0.3 ppm
Ambient Temperature 0-40 °C
(32-104 °F)
Maximum Operating Pressure 125 PSI
(8.62 bar)
Minimum UVT 75 %
Installation Orientation Horizontal or Vertical
UV Intensity Monitor Yes
Visual "Power On" Yes
Audible Lamp Failure Yes
Audible alarm mute button Yes
Visual Lamp Life Remaining Yes
Lamp Replacement Indicator Yes
Safety Interlock Yes
Flow Restrictor Optional
CoolTouch fan No
Flow Pacing No
Solenoid Valve Optional
4-20 Interface Yes
Dry Contact No
CE Yes