SC-200

The quality of drinking water can change with time and become contaminated with harmful bacteria. The Sterilight Cobalt™ system is a reliable, economical and chemical-free way to safeguard drinking water in any residential application. The Sterilight Cobalt™ system has been designed and tested to ensure quality drinking water is at everyone’s finger tips.

Features of the Sterilight Cobalt UV purification system
  • Equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli and viruses not visible to the naked eye.
  • Specially designed and tested Sterilume™-HO lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous purification.
  • The system is easy to maintain and service.
  • The ultraviolet lamp can be changed without interrupting the water flow.
  • Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation.
  • The Cobalt™ ICE power supply visually displays the remaining lamp life and will go into alarm if the lamp fails to notify the homeowner.
  • The power supply has a sealed case to prevent damage from accidental water intrusion and is fully CSA and CE compliant.

Specifications

View Specs
Manuals
Brochures

Accessories

Temperature Management Valve

Integral temperature management valve for use on systems incorporating SterilumeÔäó-HO, high-output UV lamps such as the CobaltÔäó or PlatinumÔäó systems. This fully automatic valve is installed on the outlet port of the disinfection system and will discharge a small amount of w ...

Replacement Parts

Sterilume HO UV Lamps

SPV-200, SPV-3.5, SP200-HO, SC-200 and SCM-200 high-output UV replacement lamp [30 cm (11.8")]

Quartz Sleeve

SPV-200, SPV-3.5, SP200-HO, SC-200 & SCM-200 series [33.2 cm (13.1"), domed]

Power Supply

CobaltÔäó controller for all "BASIC" high-output models, water-tight case, 4 segment LED display showing lamp life remaining and total operating time, audible indicator, one controller operates 100-240V./50-60Hz. (c/w lamp connector) (detachable IEC power cord sold separately)

O-Ring - 410867

Retaining Nut - RN- 001

Retaining nut

Product Flow Rates

Dosage
UV
Rate
16 mJ/cm² 95% UVT @ eoll 56.8 gpm
30 mJ/cm² 95% UVT @ eoll 30.3 gpm
40 mJ/cm² 95% UVT @ eoll 22.7 gpm

Product Specificiations

Dimensions
Length 17.8 inches
Diameter 3.5 inches
Power Supply 24.1 x 8.1 x 6.4 cm
(9.4" x 3.2" x 2.5")
Inlet/Outlet Port Size Combo 3/4" FNPT, 1" MNPT
Shipping Weight 5.4 kg
Reactor Chamber Material 304 S.S.
Electrical
Lamp Type Sterilume™-HO
(high-output)
Lamp Type Sterilume HO
(high-output)
Max. current 1.5 Amp
Power Consumption 35 W
Lamp Power 27 W
Voltage 100-250V / 50-60Hz
Operating Parameters
Maximum hardness 120 ppm
(7 grains per gallon)
Maximum iron 0.3 ppm
Maximum humidity 95%
Ambient Temperature 2-40 °C
(36-104 °F)
Maximum Operating Pressure 125 PSI
(8.62 bar)
Minimum Operating Pressure 4 PSI
(27.5 kPa)
Minimum UVT 75 %
Installation Orientation Horizontal or Vertical
Features
UV Intensity Monitor No
Visual "Power On" Yes
Audible Lamp Failure Yes
Audible alarm mute button Yes
Visual Lamp Life Remaining Yes
Lamp Replacement Indicator Yes
Diagnostic Check No
Safety Interlock No
Flow Restrictor No
COMMcenter control package No
CoolTouch fan No
Colour-coded plug and play connections No
Safety cap & special lamp plug Yes
Reference card No
Solenoid operation indicator No
Flow Pacing No
Solenoid Valve No
4-20 Interface No
Dry Contact No
Certifications
CSA Yes
CE Yes