Sterilight Platinum SP410-HO

The quality of drinking water can change with time and become contaminated with harmful bacteria. The Sterilight Platinum is a reliable, economical and chemical-free way to safeguard drinking water in any light commercial application. The Sterilight Platinum has been designed and tested to ensure quality drinking water is at everyone’s finger tips.

Features of the Sterilight Platinum UV purification system 
  • Equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli and viruses not visible to the naked eye.
  • Specially designed and tested Sterilume™-HO lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous purification.
  • The Flow-Pace™ UV Sensor promises system stability and long-life reliability with low power consumption, reducing operating costs and heat transfer into the water.
  • Built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation.
  • The Sterilight Platinum power supply visually counts down remaining days until lamp replacement, provides total running time of controller, visually represents UV intensity output in % and conducts a full system diagnostic check on start-up.
  • Axial Flow reactors include a patented axial flow system installed at the inlet – ensuring water confidence each and every time.


View Specs


Temperature Management Valve - 440179

Integral temperature management valve for use on systems incorporating Sterilume high-output UV lamps. This fully automatic valve is installed on the outlet port of the disinfection system and will discharge a small amount of water to drain when the system reaches a preset temperature. T ...

Junction Box 270142

All-in-one solenoid junction box for Platinum systems. Water-tight box allows for easy connection to power, solenoid valve (supplied separately) and the dry contact connection on the Platinum controller, supplied with 110V./60Hz. North American (NEMA 5-15P) power cord.

Low lead Solenoid Valve SOL-1.0

1" solenoid valve, 110V./50-60Hz.

Replacement Parts

Quartz Sleeve QS-410

 [54.2 cm (21.3"), domed]

Power Supply SPC-ICE-HO

detachable power cord sold separately

UV Sensor 254NM-FP1

Flow-Pace sensor assembly (complete with 3' sensor cable)

Electrical Cords 260121

North American (NEMA 5 - 15P, 3-prong, grounded (115V)

Sterilume HW UV Lamps

SP410-HW high-output UV replacement lamp [51 cm (20")]

Lamp / Sleeve Combo Kits (2-pieces) SHO410-QL

Kit, Lamp and Sleeve (comes with 1 o-ring)

Product Flow Rates

16 mJ/cm² 95% UVT @ eoll 31 gpm
30 mJ/cm² 95% UVT @ eoll 20 gpm
40 mJ/cm² 95% UVT @ eoll 14 gpm

Product Specificiations

Length 26 inches
Diameter 3.5 inches
Power Supply 25.4 x 11.4 x 5.3 cm
(11" x 4.5" x 2")
Inlet/Outlet Port Size 1" MNPT
Shipping Weight 7.7 kg
Reactor Chamber Material 304 S.S.
Lamp Type Sterilume HO
Max. current 0.6 Amp
Power Consumption 60 W
Lamp Power 46 W
Voltage 100-250V / 50-60Hz
Operating Parameters
Maximum hardness 120 ppm
(7 grains per gallon)
Maximum iron 0.3 ppm
Ambient Temperature 0-50 °C
(32-122 °F)
Maximum Operating Pressure 125 PSI
(8.62 bar)
Minimum Operating Pressure 4 PSI
(27.5 kPa)
Minimum UVT 75 %
Installation Orientation Horizontal or Vertical
UV Intensity Monitor Yes
Visual "Power On" Yes
Audible Lamp Failure Yes
Audible alarm mute button Yes
Visual Lamp Life Remaining Yes
Lamp Replacement Indicator Yes
Safety Interlock Yes
Flow Restrictor Optional
Flow Pacing Yes
Solenoid Valve Optional
4-20 Interface No
Dry Contact Yes
CE Yes