The technology and care that goes into the development of our products is of the highest standards. Our UV purification systems have been designed and tested against the most rigorous validation and testing methods in the industry.
  • Equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli and viruses not visible to the naked eye.
  • The special lamp plug ensures that no one can power the UV lamp if it’s not in the UV chamber.
  • System is equipped with a drain plug to make draining easy and accessible.
  • Lamps and sleeves are assembled together for ease of handling. They can be replaced separately, in minutes and without tools.
  • The reference card outlines the most important system functions and maintenance for quick, on-the-spot questions.
  • Indicator lights show the status of system components. Warning lights appear when system maintenance is required.
  • The lamp timer display starts at 365 and counts down the days to annual lamp replacement.
  • Once annual lamp replacement is completed, press this button to restart the lamp timer.
  • Our high output validated UV lamp is engineered to treat variable water conditions.
  • System comes supplied with sediment filter and carbon block filter to reduce odours, colour and particles commonly found in water. Reduces the need for expensive pre-treatment systems!
  • The system comes equipped with high flow filters allowing the water pressure to remain consistent.
  • Bracket is a gauge steel that is powder coated for both durability and aesthetics.
Part # IHS12-D4


View Specs


CoolTouch Valve Kit (3/4) - 650537

Solenoid/Remote Alarm Junction Box - 650705

24V solenoid/remote alarm junction box, available as 120V (24V solenoid valve not included).
Part #: 650705

Low Lead Solenoid Kits 3/4

Low lead solenoid kits (24V) with junction box and 24V transformer, available as 120V input only
Part # 650717-001

Remote Cords - 603071

Remote options cords for UVMAX

Replacement Parts

High Output Lamp - 602805

Replacement Quartz Sleeve 602732

Power Supply Kit 650713-013

Sediment Filter CMB-510-HF

CMB-510-HF - Sediment filter 20-5 micron for dirt/rust, 4 3/8 OD x 10" long.

Carbon Block Filter C2-02

O-Ring 002045

Safety Cap 603000

Lamp / Sleeve Combo 602810-102

Lamp and Sleeve combo kit, two pieces, o-rings included.

Product Flow Rates

30 mJ/cm² 95% UVT @ eoll 12 gpm
40 mJ/cm² 95% UVT @ eoll 9 gpm

Product Specificiations

Width 24.4 inches
Height 27.3 inches
Diameter 12 inches
Power Supply 22 x 15 cm
(8.5" x 6")
Inlet/Outlet Port Size 3/4" NPT
Shipping Weight 15.9 kg
Reactor Chamber Material 304 SST
Max. current 0.5 Amp
Lamp Type LPHO Amalgam lamp
Power Consumption 50 W
Lamp Power 40 W
Voltage 100-250V / 50-60Hz
Operating Parameters
Maximum iron 0.3 ppm
Maximum hardness 120 ppm
(7 grains per gallon)
Maximum humidity 100%
Ambient Temperature 0-50 °C
(32-122 °F)
Maximum Operating Pressure 125 PSI
(8.62 bar)
Minimum Operating Pressure 4 PSI
(27.5 kPa)
Minimum UVT 75 %
Installation Orientation Horizontal
UV Intensity Monitor No
Visual "Power On" Yes
Audible Lamp Failure Yes
Audible alarm mute button Yes
Visual Lamp Life Remaining Yes
Lamp Replacement Indicator Yes
Diagnostic Check No
Safety Interlock Yes
Flow Restrictor No
COMMcenter control package No
CoolTouch fan No
Colour-coded plug and play connections No
Safety cap & special lamp plug Yes
Reference card Yes
Solenoid operation indicator No
Flow Pacing No
Solenoid Valve Optional
4-20 Interface Optional
Dry Contact Yes
CE Yes
UL Yes
Sediment Filtration Yes, 5 micron
Filter Housing One 10" and one 20" high flow
Carbon Filtration Yes, 5 micron